" two hearts become one "
Maybe you saw a band someplace else but don't see it here, simply send us a request and we will try to come up with something similar for you of course with our great prices.
The best and most accurate way to
determine ring size is to have your finger professionally measured with a ring
in the same millimeter (mm) width as the ring you are considering purchasing.
Many of our customers have found that trying on wedding bands in different
widths is the easiest way to determine their exact ring size.
Some customers have also found the above ring sizer to be a helpful guide to
determining ring size. In order to print the ring sizer on this page, be sure
that your printer is set to 100%. In other words, make sure that you have not
reduced the print size in 'page set up.' You can verify that the sizer printed
correctly by measuring it with a ruler; it should measure from left to right:
3 3/8 inches.
Once you have printed the sizer, you may cut it out and use it or try the following directions to find your ring size:
1. Wrap a piece of loose string around your finger. Be sure to allow for the size of your knuckle.
2. With a pen, mark the point on the string where the end meets.
3. Using the chart, place the end of the string on the left hand line next to the letter "A" and stretch the string
along the sizer toward the numbers.
4. The pen mark on your string should line up with a number to indicate your ring size.
Copyright 2009 @ weddingbands.tk All rights reserved Tel.No. 3308776 Mobile No. 09207056606 , 09266120699
